1, product processing. Operators to maintain a correct posture, to have sufficient energy to work, if found unwell, in order to personal safety, it is necessary to immediately leave the job, and to the workshop supervisor or higher level of leadership. When the operation should be concentrated, stop idle talk, cooperate with each other operator do not operate in a state of irritability and fatigue, in order to personal safety, prevent incidents, and ensure the safety of operation.

2, Check whether the moving part is filled with lubricating oil before mechanical operation, then start and check whether the clutch and brake are normal, and run the machine empty for 1-3 minutes, and stop the operation when the machine is faulty.

3, When replacing the mold, the power supply should be closed first. After the press movement department stops running, the installation and debugging of the mold can be started. After the installation and adjustment, move the flywheel by hand twice. In order to prevent unnecessary collision between the machine and the product to be processed, it is necessary to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the holder ring is in a reasonable position.

4, it is necessary to wait for other personnel to leave the mechanical work area, and take away the debris on the work table, before starting the power to start the machine.

5, mechanical operation, stop the hand into the slider working area, stop using the hand to take, release the work. When taking and releasing parts in the die, it is necessary to use things that meet the specifications. If the machine has abnormal sound or machine failure, the power switch should be closed immediately for check.